Milwaukee

Milwaukee PH600 Digital pH Pen

23€
Milwaukee

Milwaukee PH600 Digital pH Pen

23€
PH600
10

DIGITAL. SIMPLE. COMPACT.

DESIGN FEATURES

Fast, accurate results with digital LCD readout.

Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize.

Simple 1 point calibration with an easy-to-use trimmer located on the back of the tester to protect from accidental splashes.

Cap to protect the pH sensor and keep it wet when stored upright.

Low power demand for extended battery life (batteries included).

Comes in a hard carrying case complete with calibration screwdriver and instructions.

USE AND CARE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Solutions MA9015 & MA9016 at checkout time! This will be needed to help clean and condition the pH electrode before use!

Here are our top four tips.

1. Always store upright with the cap full of buffer or storage solution MA9015 not water.

2. Clean your Pen regularly by soaking in cleaning solution MA9016.

3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.

4. Gently stir the Pen in the sample for a faster result.

SPECIFICATIONS

pH range: 0.0 to 14.0 pH

Resolution: 0.1 pH

Accuracy: +/- 0.1 pH

Typical EMC Deviation: +/- 0.2 pH

Calibration: Manual, 1 Point

Environment: 32°F to 122°F (0 to 50°C) 95% RH

Approximate dimensions: 6 x 1.2 x 0.95 inches

Weight: 3 ounce

Battery Type: 3 x 1.5 V Alkaline (included)

Battery Life: 700 hours

Warranty: 2 years

Alleen 10 eenheden van dit product blijven

You might also be interested in: