DESCRIPTION

The Milwaukee Waterproof pH55 PRO pH/Temp. Tester is one of our most accurate cost effective, well rounded, rugged and reliable testers in the market featuring dual level LCD readouts, easily replaceable probe and extended pH ranges to meet almost any application. It's simple 1 or 2 point automatic calibration is simple-to-use and offers TWO sets of memorized buffers to select. Ideal for use in aquariums, hydroponics, horticulture, education, pools, beer and many other applications.

The Milwaukee Waterproof pH55 pH/temp. tester offers:

ACCURACY

The Waterproof pH55 PRO tester is accurate to ±0.1 pH & +/-0.5°C (+/-1°F) and is easy to read.

With easy 2 point automatic calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters. Simple design and rugged, it brings great value for any application. Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results.

LONG LIFE

The tester comes with a replaceable pH probe with a double junction probe designed for longer life.

FAST RESPONSE

The probe is double junction allowing quick, accurate pH readings and respose times.

WATERPROOF CONSTRUCTION

No more worries about dropping your tester while measuring. The pH55 PRO is waterproof to IP65.

LIGHT WEIGHT

At just 3.5 ounces, the pH55 PRO is easy to handle at up to half the weight of other testers.

EASE-OF-USE

A large Dual Level LCD screen with easy-to-read graphic symbols, makes it easy while calibrating or reading your measurement. This takes the takes the guess work out of litmus paper.

DESIGN FEATURES

Fast easy to read results with large digital LCD readout.

Extreme pH accuracy to ±0.1 pH with an extended pH range (-2.0 pH to 16.0 pH).

Resolution to 0.1 pH.

Lightweight and portable.

Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.

Fulley temperature compensated (ATC).

Simple Automatic one or two-point calibration.

2 Sets of pre-memorized buffers.

Gel-filled, double junction pH electrode for low maintenance and high performance.

Over 300 hours of battery life (batteries included).

Fully waterproof to IP65.

Replaceable pH electrode Mi56P.

CARE AND USE

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Solutions MA9015 & MA9016 at checkout time! This will be needed to help clean and condition the pH electrode before use!

Here are our top four tips.

Here are our top four tips.

1. Always store with the cap full of buffer or storage solution MA9015 not water.

2. Clean your Tester regularly by soaking in cleaning solution MA9016.

3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.

4. Gently stir the Tester in the sample for a faster result.

SPECIFICATIONS

pH Range: -2.0 to 16.0 pH

Temperature Range: -5.0 to 60.0°C (23 to 140°F)

pH Resolution: 0.1 pH

pH Accuracy: ±0.1 pH

Temperature Accuracy: ±0.5°C (±1°F)

Typical EMC Deviation: ±0.1

Typical EMC Temperature Deviation: ±0.3°C (±0.6°F)

Temperature Compensation: Automatic from -5 to 60°C (23 to 140°F)

Calibration Automatic: 1 or 2 points with 2 sets of pre-memorized buffers (pH 4.01, 7.01, 10.01) or (pH 4.01, 6.86, 9.18)

Probe: Replaceable double junction for extended life (Mi56P)

Environment: -5 to 50°C / 23 to 122°F; max RH 100%

Battery Type: 4 x 1.5V; IEC LR44, A76 (included)

Battery Life: Approx. 300 hours of use

Auto-off: after 8 minutes on non-use

Dimensions: 254 × 67 × 47 mm

Weight: 99.22 g